Aqua-Marina PA-AR01, User Manual

Page: 14 / 75

14
FAQs (Frequently Asked Questions)
Q: How much air should I pump into my board, and how long does it take
to inflate?
A: The recommended pressure is 12 – 15PSI, any higher you risk over inflating
and damage. Depending on the size of your board it can take anywhere
from 5 to 8 minutes.
Q: When detaching the pump from the board, the air starts to release from
the valve. How do I stop this from happening?
A: The air is releasing as the valve spring pin has been left in the deflating
position. Simply push down and turn the pin until it lifts up into the inflation
position and stops air from releasing; continue to inflate the board to the
required pressure.
Q: Can I leave my board inflated in the sun and over night?
A: If leaving the board inflated, we strongly recommend you to remove it from
direct sunlight and deflate the board to at least 10PSI.
Q: How should I clean and how should I store my board?
A: We only recommend water and a mild soap. Heavy detergents and solvents
can damage your board. It is best to clean and dry your board, take out the
fins, roll it up and put in the bag.
Q: If I puncture my board, can I repair by myself?
A: Yes, you can use the required tools listed in the manual with the supplied
repair kit or email us for more information at info@aquamarina.com.
Customer Service Rusta
Consumer contact: Rusta Customer Service, Box 5064,
194 05 Upplands Väsby, SWEDEN
Website: www.rusta.com
E-mail: customerservice@rusta.com