manualshive.com logo in svg

APV MDC, Translation Of The Original Operating Manual, Page: 48 / 52

Share
Download
APV MDC Translation Of The Original Operating Manual Download Page 48

48 

Quality for Professionals 

•

  The operating manual calls for the use of CE-marked exchangeable universal 

joint shafts as well as their covers! 

•

  Some parts have stickers warning about high temperatures. When working on 

these parts when they are hot, safety gloves must be worn. Dust deposits on the 
hydraulic motor must be prevented. Clean. 

•

  The motors of the rotary valve / seeding shaft and spreading plate can get hot. 

Warning stickers are applied on the motors. The operator must check the motors 
regularly for changes in temperature and remove any accumulated dust. 

•

  The operator must ensure that no one is in the vicinity of the multi-metering unit 

when it is being moved by the tractor's hydraulic system for use of the spreading 
disc. Visual check by the driver. When driving on roads, the operator must ensure 
that the raised multi-metering unit cannot be lowered (stop valve in the tractor 
hydraulic system or similar). Moreover, when driving on roads, the controller must 
be switched off by the user (no accidental starting up of e.g. the spreading disc).  

 

  Mounted implements 

 

•

  Before mounting and dismounting implements on the three-point linkage, move 

the operating devices into the position that excludes unintentional lifting or 
lowering!

 

•

  When mounting, the operator must ensure that the requirements for the tractor or 

agricultural implement specified in the operating manual are met and that the 
connections specified in the operating manual are made correctly.

 

•

  When mounting the multi-metering system, the operator must ensure that there is 

a metallic connection made to the tractor or agricultural implement.

 

•

  For three-point mounting, the mounting categories of the tractor and the 

implement must match or be adapted!

 

•

  There is a risk of injury due to crushing and shearing points in the area of the 

three-point linkage!

 

•

  Do not stand between the tractor and the implement when actuating the external 

controls for the three-point mounting!

 

•

  When the implement is in transport position, always ensure that the tractor three-

point linkage is sufficiently locked to the sides!

 

•

  When driving on roads with the implement lifted, the operating lever must be 

locked against lowering!

 

•

  To check the procedure, the operator must have a view on the mounted multi-

metering system or on the agricultural implement on which it is mounted, as well 
as hazardous movement zones.

 

•

  When performing field passes and when the spreading disc is used, the tractor's 

speed must maintained between

 

1 and 20 km/h, as specified in the operating 

manual and depending on the seed.

 

 

  Maintenance 

 

•

  Maintenance, repair, and cleaning work as well as the elimination of malfunctions 

should always be performed when the drive is switched off and the motor is at a 
standstill! – Remove the ignition key! – Switch off the implement! 

•

  Check the nuts and bolts regularly for tight fit and retighten if necessary! 

•

  When performing maintenance on the lifted implement, always ensure safety 

through suitable support elements! 

Summary of Contents for MDC





















































Reviews:

No comments