APV MDC Translation Of The Original Operating Manual Download Page 44 | Manualshive

Page: 44 / 52

APV MDC Translation Of The Original Operating Manual Download Page 44

44

Quality for Professionals

13 My idea

The multi-metering units from the

MDG, MDP, MDS and MDC

model series have

been extensively developed and tested. It took a long time from the initial idea to

serial production. It required lots of commitment from the entire development team.

Nonetheless, the most valuable experience is gained in practice. Our motto:

"

Inspired by Farmers & realized by Professionals.

"

This is how customer proximity of the development department creates a leading

edge for you and APV.

Tell us about the positive and negative experiences you have had with the machine.

Share your suggestions for improvement and your ideas with us:

[email protected]

Take pictures or make hand-drawn sketches! We are open and grateful for any

information, no matter in what form.

Your information goes directly to the leading developers at APV.

I would like to thank you in advance for your involvement and wish you lots of fun

with your APV product!

Sincerely yours

Your Head of Development & Customer Service

Ing. Gregor Witzmann, MSc, MBA

«
...
42
43
44
45
46
...
»

Summary of Contents for MDC





















































Reviews:

No comments