
33
Quality for Professionals
NOTE:
with the MDC, you should perform the calibration test in such a manner that
you collect the product at the end of the hoses! Wear suitable protective clothing and
respiratory protection to avoid contact with the product!
Assembling the seeding shaft for the MDC
Assemble the seeding shaft according to the following drawing:
CAUTION:
it is important that the closed side of the blind fb seed wheel is always
resting on the fine f seed wheel and the spacing discs are placed between the open
sides of the seed wheels.
5 spacing discs must be installed for each combination
.
Fig.: 36