17
Quality for Professionals
Point of impact adjustment for the MDS
The point of impact adjustment can be used to adjust the entire spreading pattern by
20° in both directions. This can be important for some spreading materials. For
example, if the spreading pattern is turned by 15° to the right, the point of impact
adjustment is turned by 15° to the left. If you move it further to the right, a boundary
spreading function can also be obtained.
Spreading disc, lateral distribution, and throwing vanes for
the MDS
The spreading disc must rotate counter clockwise. The spreading plate has 2
throwing vanes that are positioned not quite parallel to each other. They are only
slightly adjustable, since their arrangement and shape are already trimmed for
perfect lateral distribution. The spreading cone is only corrected using the point of
impact adjustment and the throwing vanes. To achieve optimal lateral distribution for
the selected working width, you must then still adjust the setting of the throwing
vanes on the spreading plate. When doing so, be sure to disconnect the power
supply from the control box!
To adjust the throwing vanes, loosen them and turn the
throwing vane to the required position. Then tighten all of
the bolts again!
Fig.: 18
Fig.: 19
Fig.: 17