Page 24
Original operating manual LF 600 M1
APV – Technische Produkte GmbH
6.4
Replacing nozzles
Purpose
The spreading results are significantly improved by installing the right nozzle.
Requirements
The following requirements must be fulfilled for this work step:
•
The implement is disconnected from the power source, see
Disconnecting the Liquid Fertilizer
from
the power source (page 29) for more information.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
•
None
Procedure
Step
Description
Illustration
1
Push back the blue stop on the plug connector.
2
Remove the nozzle.
3
Push the new nozzle into the plug connector. The nozzle
engages automatically.
4
Check that the nozzle is firmly seated by pulling on it slightly.
6.5
Filling the tank
Purpose
The fertilizer tank contains the fertilizer to be spread.
The fresh water tank contains fresh water for cleaning and flushing the pump and nozzles.
Requirements
The following requirement must be fulfilled for this work step:
•
The implement is disconnected from the power source, see
Disconnecting the Liquid Fertilizer from
the power source
(page 29) for more information.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
•
Liquid fertilizer
•
Fresh water
