Page 20
Original operating manual LF 600 M1
APV – Technische Produkte GmbH
5.4.1 Spread rate (l/ha)
In this menu point, the desired spread rate can be set by pressing the
+ or – key. By holding the + or - key, the value is changed more
quickly.
5.4.2 Working width
In this menu point, the desired working width can be set by pressing
the + or – key. By holding the + or - key, the value is changed more
quickly.
5.4.3 Forward speed
In this menu point, the desired forward speed can be set by pressing
the + or – key. By holding the + or - key, the value is changed more
quickly.
5.4.4 Pulses per litre
In this menu point, the pulses per litre that are emitted by the flow
sensor can be set by pressing the + or – key. By holding the + or -
key, the value is changed more quickly.
The value can be seen on the flow sensor and should remain set at
400 pulses per litre (default value).
If, contrary to expectations, the actual spread rate should consistently
deviate from the target spread rate, corrections can be made by
adjusting this value. For example, if the spread rate is 5% too high,
this value must be reduced by 5% and vice-versa.
5.4.5 To the Main menu
Select this menu point with the OK button to go back to the Main/Work
screen.
5.5
Emptying
The Emptying menu is reached by pressing the arrow keys. By pressing the OK button, the pump is
switched on and operated at full speed. Depending on the position of the stop taps, this function can
either be used to stir the tank contents or also to empty the tank.
5.6
Trip and total counters
By pressing the arrow keys on the Main screen, different counter
readings can be called up. By pressing and holding the OK button for 5
seconds, the trip counter can be set to zero.
Beside the quantity counter, there is also a counter for the area and the
operating hours. The trip counter can also be set to zero here by
pressing and holding the OK button.
