29
6.3.6.1
TASK CONTROLLER MENU FOR MOUNTED IMPLEMENTS
Figure 25
Description of the button functions
With the CANCEL button, the values are not adopted and you go back one menu level;
in this case, to the Set menu.
The set value is applied with the OK button.
Description of the display elements
Here, the desired mode can be set. There is a choice between
ON, OFF or AUTO.
Here, the connection of the implement to the tractor can be set.
If the implement is "mounted", a selection can still be made as to
whether it is mounted at the rear "Rear" or at the front "Front".
Here, the horizontal distance (A) from the reference point of the
tractor to the seeding rail is entered.
The reference point for a rigid mounted implement is the centre
point of the lower link hooks.
Summary of Contents for ISOBUS M2
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
