22
6.3.3.1
CALIBRATION TEST RESULTS PAGE
Figure 16
Description of the display elements
Here, the calculated spread rate is shown.
Here, the weight determined for the calibrated seed is entered.
Here, the minimum and maximum calculated working speed will be shown.
6.3.3.2
PERFORMING A CALIBRATION TEST
During the calibration test, the suitable seeding shaft speed is determined for the selected settings (see
Point 6.3.3).
PLEASE NOTE!
A proper calibration test is important, as it is the only way to ensure that your desired spread
rate is achieved.
The calibration test must be performed as follows:
Summary of Contents for ISOBUS M2
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
