12
With this button, the seeding shaft can be switched on or off.
If an electric fan is installed, it will start running automatically. Only then does the seeding
shaft start rotating.
If the seeding shaft is activated, the triangle at the top left on the button lights up green
– it is highlighted grey when it is deactivated.
With this button, the electric fan can be switched on or off. If an electric fan is not installed,
this button is hidden.
If the fan is activated, the triangle at the top left on the button lights up green
– it is
highlighted grey when it is deactivated.
With this button, the pre-metering can be started.
Press and hold the button and the seeding shaft will rotate at the forward speed set in
the pre-metering menu. When the button is released, the current forward speed is used
again to regulate the seeding shaft.
This allows you to avoid gaps in the seeded area at the beginning of the field or when
standing still on the field.
With the 100 % button, the spread rate can be set back to the value determined during
the calibration test.
If the implement type PS TWIN is selected in the basic settings (see Point 5.2), an extended Work menu
is available. It is described under Point 7.1.1.
Description of the display elements
Display of the currently selected seed, including the number in the seed library.
Display of the currently set change to the spread rate.
Yellow-brown: according to the fill level sensor, the hopper is full.
Red: according to the fill level sensor, the hopper is empty.
Settings for the fill level sensor are described under Point 6.3.2.
Display of the currently set spread rate.
NOTE:
a valid calibration test must have been performed beforehand to be able to display
a value.
Summary of Contents for ISOBUS M2
Page 54: ...54 NOTES ...
Page 55: ...55 NOTES ...
