26
Quality for Professionals
•
Before exiting the tractor, lower the implement onto the ground, switch off the motor
and remove the ignition key!
•
Standing between the tractor and the implement is forbidden unless the vehicle is
secured against rolling away using the parking brake and/or with wheel chocks!
•
Folded frames and lifting devices must be locked in transport position!
•
Packer catch arms must be swivelled in and locked before road transport!
•
Lock the track markers in transport position!
•
The view on the grassland harrow and the hazardous movement area must be clear
(to check the procedure).
•
Cleaning is recommended as specified in the maintenance instructions. The
procedure in in maintenance instruction must be observed and protective
equipment must be used.
•
Working under the implement is forbidden.
•
The implements must be checked regularly by the operator (before every use) for
any fractures and cracks, chafe marks, leaks, loose bolts and connections,
vibrations, unusual sounds, and to ensure they function correctly.
•
Hearing protection should be used, if necessary.
•
During assembly, the operator must ensure that the requirements for the tractor in
terms of the power, axle loads and weight distribution as specified in the operating
manual are met and that the connections specified in the operating instructions are
made correctly.
•
When mounting the implement, the operator must ensure that connections to the
tractor hydraulic system are clean and carefully connected.
•
When performing the work passes, the tractor's speed must maintained as
specified in the operating manual. This can be between 6 and 12 km/h.
•
Use additional lighting (e.g. flashlight) if necessary for repair or maintenance work!
19.3 Mounted implements
•
Before mounting and dismounting implements on the three-point linkage, move the
operating devices into the position that excludes unintentional lifting or lowering!
•
For three-point mounting, the mounting categories of the tractor and the implement
must match or be adapted!
•
There is a risk of injury due to crushing and shearing points in the area of the three-
point linkage!
•
Do not stand between the tractor and the implement when actuating the external
controls for the three-point mounting!
•
When the implement is in transport position, always ensure that the tractor three-
point linkage is sufficiently locked to the sides!
•
When driving on roads with the implement lifted, the operating lever must be locked
against lowering!
•
When mounting the grassland harrow, the operator must ensure that there is a
metallic connection made to the tractor.
•
The operator must ensure that no one is standing close to the grassland harrow
when it or its components are being moved by the tractor hydraulic system or when
the side wings are being lifted or lowered. Visual check by the driver!
