10
Quality for Professionals
After the first 10 operating hours and subsequently every 50 operating hours, the
hydraulic units and tube lines must be checked for leaks and the bolted
connections must be tightened if necessary.
Check the hydraulic hoses for wear before every operation.
Caution!!! Liquids escaping under high pressure can penetrate the skin. For this
reason, a physician must be consulted immediately in case of accident!!!
After cleaning, lubricate all of the grease points and distribute the grease evenly in
the bearing points (e.g. perform a short test run).
Do not use a high pressure cleaner to clean bearing and hydraulic parts.
The paint can be damaged by cleaning with excessive pressure.
During the winter, the implement should be protected against rust with an
environmentally-friendly product.
Park the implement protected from weather conditions.
Hydraulically as well as mechanically folded implement must only be parked in a
folded state.
Put down the implement in a way that the tines are not needlessly strained.
Occasionally check the tyre inflation pressure (tyres 16x6.50 approx. 2 bar,
18x8.50 approx. 3 bar).
9
Location of the rating plate
The rating plate is found on the main frame beside the mounting frame bracket.
In cases of inquiries or warranty
claims, please always tell us the
production number of your
implement.
Fig.:
7
