29
Quality for Professionals
Operating voltage
Not OK!
Implement
is being switched off!
Error
Slider 1!
Motor is overloaded!
_
Motor not
connected!
Cable not OK!
Electronics not OK!
12 Controller messages
12.1 Notes
Display
Cause
Solution
Is displayed when the
operating voltage is too low
or fluctuates too strongly.
Minimise the
consumers;
check the battery;
check the wiring;
check the alternator.
Is displayed during the
shutdown process.
The message disappears
after a few seconds.
12.2 Errors
Display
Cause
Solution
Is displayed when the
wiring is faulty.
Check the cables and
plugs.
Is displayed when the
wiring is faulty.
Check the cables and
plugs.
Is displayed when the
spreading disc cannot
rotate.
Check whether there
are objects blocking or
impeding the agitator or
spreading disc.
If your implement is
equipped with two
agitator pins, remove
the upper one.
Is displayed when the
wiring is faulty.
Check the cables and
plugs.
Appears when the
electronics in the control
box get too hot.
Please contact
customer service.
