31
Quality for Professionals
15 Accessories
15.1 Chassis lifting unit sensor
Order number:
Item no.: 00410-2-173
Connection
:
12-pin plug on the control box
The slider on the ES 100 M3 Special is opened and closed automatically.
Cable length:
5 m
Installation position:
Since most soil tillage implements are lifted and lowered during
their operation, installing the sensor on the tractor's lifting arm is
the best method (see image above).
However, the sensor can also be attached at other positions
that have mechanical movement of more than 50 mm. The
distance between the sensor and the magnet should be approx.
5 mm.
For semi-mounted soil tillage implements, the sensor can be
installed on the chassis, because the lifting unit is not used in
this case.
If the working position is to be turned, the OK button and the ON/OFF button must be
pressed simultaneously when switching on.
The following appears on the display:
Items included:
1 sensor, 2 magnets incl. bolts, cable ties, 1 fastening plate,
2 PVC nuts for the sensor
NOTE:
the sensor must not be bolted on too strongly (tension)!
Three-point linkage
signal
Inverted!
Fig.: 16
