ECU-C Installation/User Manual
11
3.Hardware Installation
The network cable in the package can be used to connect the ECU-C
with PC directly. One side is connected with the ECU-C and the other
side is connected with the PC. Then change the IP address and the
network mask to 192.168.131.1 and 255.255.255.0, respectively.
1. A PLC bridge uses the power line to communicate and requires
both a “send” and “receive” unit.
2. The quality and length of the LAN cable will affect the ECU-C
communication quality. You can use a Switch to enhance the
communication quality if necessary.
Recommended communication distance:
ECU-C can communicate with the inverters up to 76 meters (250ft)
with direct sight.
ECU-C can utilize Wi-Fi (WLAN) up to 9 meters (30ft) with direct sight.
