ECU-C Installation/User Manual
36
6.Local Network Interface
d) Changing the Language
Users can switch language between English and Chinese.
1) Select “Administration” at the top of the page.
2) Select “Language”.
3) Select the language from the Current Language pull down.
4) Press “Update”.
e) Managing the Network Connection
The default network connection setting for the ECU-C is “DHCP,” which
allows the ECU-C to automatically establish a connection assignment from
the router. The ECU-C can be assigned a static.
IP Address if the network design requires it.
1) Select “Administration” at the top of the page.
2) Select “Network Connectivity”.
3) Select “Obtain an IP address automatically”.
4) Press “Update”.
f) Managing the WLAN connection
The ECU-C can both work in two modes: WLAN and Local Wireless Access.
In WLAN mode, the ECU-C can connect to a router by Wi-Fi. In Local
Wireless Access mode, user’s phone or PC can connect to ECU-C to access
local web.
Static IP mode and WLAN mode cannot be used at the same time.
WLAN mode
1)Select “Administration” at the top of the page.
2) Select “WLAN”, and click “WLAN” tab.
3) The ECU-C will display the available networks.
Select the button next to the available network that you wish to
access SSID, and a password entry field will be displayed below the
network name. Enter the password into the password entry field,
then click “Connect”.
4) If ECU-C has connected to the router, it will display the SSID and
IP address. Now you can connect by PC or phone to the router.
Enter the ECU-C’s IP (e.g., 192.168.4.119) into the browser to access
the local web.
Local Wireless Access mode
1)Scan the ECU-C’s SSID on PC and phone, and connect to ECU-C.
Enter the ECU-C’s IP 172.30.1.1(The IP is fixed) into browser to
access the local web.
