ECU-C Installation/User Manual
8
3.Hardware Instrallation
Attach two buckles below in the edge of the guide, press two
buckles above, then embed to the edge of the guide.
Figure 7
Do not put the antennas inside a metal box, that will block the signal.
If the roof is metal, please use this long cable antenna, and place it
outside or on roof.
2) Using a Wall Mount
When mounting the ECU-C to a wall, make sure to select a cool, dry
indoor location.
According to the size of an icon, The energy communicator is fixed
on the wall with two Wall screws or wall anchors.
Four M4 spacers are fixed to the wall, and the punch sizes
are as follows:
Figure 8
110mm(4.3' )'
129.4mm(5' )'
