-
18
-
English
Installation
• Secure the guide to the brackets using the screws inserted
in the external tracks earlier (
fi g.11-ref.1
).
• Secure the coupling to the middle of the top part of the
door using the 4 special screws (
fi g.12-ref.1
).
• Remove the cover from the carriage as shown in
fi g.13
.
• Insert the drive rod in the housing and secure it using the
special screw (
fi g.13-ref.1
).
• Refi t the cover by clicking it into place making sure that the
release cable is inserted in the outfeed hole (
fi g.13-ref.2
).
ASSEMBLY ON ROLLER SHUTTER DOORS
• Secure the free end of the drive rod on the door coupling
using the special cylindrical pin and split pin (
fi g.14-ref.1-
2
).
ASSEMBLY ON UP-AND-OVER DOORS
(USING SPECIAL ARM)
• Position the special arm on the door and secure it in the
couplings using the special screws (
fi g.16-ref.1
and
2
).
• Secure the arm to the drive rod using the bolts and
self-locking nuts (
fi g.16-ref.3
).
CAUTION! Maintain the distances specifi ed in fi g.15
and
16.
• Lower the release cable through the hole in the coupling
(
fi g.14-ref.3
or
fi g.16-ref.4
).
• Lubricate the chain with grease.
1
1
2
fig.13
cover
carriage
2
1
3
fig.14
1
3
4
8 cm
2
fig.16
1
1
1
fig.12
fig.11
4 cm
fig.15
