APRILIA SPORTCITY 125, Manual

Page: 16 / 64

16
use and maintenance
SportCity 125 - 200
Miles
TRIPODO
AM
PM
Km
1
MODE
2
AUXILIARY EQUIPMENT
MULTIFUNCTION DIGITAL COM-
PUTER
Multifunction indicator functions
Use the Mode button (2), on handlebar
right control, to select among various func-
tions: clock setting, odometer (ODO), trip
meter (TRIP), battery voltage value and trip
meter reset.
Odometer (ODO)
When the instrument panel is switched on,
the multifunction display (1) shows the
odometer function (ODO).
TRIP function (TRIP)
With the odometer display (ODO), press
the Mode button (2) once to display the
function (TRIP). Hold down the Mode but-
ton (2) for at least three seconds to reset
stored trip value.
Battery voltage
With the odometer display, press the Mode
button (2) twice to display the battery func-
tion.
Conversion of unit of measurement -
Km/Mi
When battery voltage is displayed on multi-
function display (1), hold down the Mode
button (2) for more than ten seconds to
change the unit of measurement from kilo-
metres (Km) to miles (Mi). While pressing
the button, the current unit of measure-
ment is flashing. Should the button be
pressed for less than ten seconds, the con-
version will not take place.
Setting the clock
CAUTION
For safety reasons, it
is possible to set this function when vehicle
is stopped only.
Hold down the Mode button (2) for at least
three seconds.
The column dividing hours and minutes will
start flashing.
Set the hour value, it will increase by one
unit every time you press the Mode button
(2).
Hold down the Mode button (2) again for at
least three seconds to shift to minute set-
ting. The indicated value will increase by
one unit every time the Mode button (2) is
pressed.
Hold down the Mode button (2) for at least
three seconds to go back to hour setting.
If no key has been touched for three sec-
onds, the display will automatically quit the
clock setting function.