APRILIA SPORTCITY 125, Manual

Page: 14 / 64

14
use and maintenance
SportCity 125 - 200
2
1
4 3
MODE
6 5 7
MAIN INDEPENDENT CONTROLS
CONTROLS ON LEFT HANDLEBAR
CAUTION
The electric compo-
nents only operate when the ignition switch
is in the
≈ ∆ position.
1) PASSING BUTTON
Press the button (PASSING) to activate
the high beam flasher.
CAUTION
Release the button
≈ ≈ to disable the high beam flasher.
2) HORN BUTTON ( )
Press this button to operate the horn.
3) TURN INDICATOR SWITCH (
(
)
To indicate the turn to the left, move the
switch to the left; to indicate the turn to
the right, move the switch to the right.
Press the switch to cancel the signal.
4) DIMMER SWITCH ( - ) / HIGH
BEAM FLASHER (
PASSING
)
If the dimmer switch is in position ≈ ∆ ,
the high beam comes on; while if it is in
position
≈ ∆ , the low beam comes on.
CONTROLS ON RIGHT HANDLE-
BAR
CAUTION
The electric compo-
nents only operate when the ignition switch
is in the
≈ ∆ position.
5) MODE BUTTON
Move the MODE button to the left to
switch the instrument panel.
6) ENGINE STOP SWITCH
(
- )
7) STARTER BUTTON ( )
Press the button ≈ ≈ to have the starter
motor crank the engine. For the starting
procedure, see page 27 (STARTING).
WARNING
Do not operate the engine stop switch
“ - ” while riding.
This switch serves as a safety or emer-
gency switch.
With the switch in position
≈ ∆ , it is pos-
sible to start the engine; the engine can
be stopped by moving the switch to po-
sition
≈ ∆ .
CAUTION
With the engine stopped and the
ignition switch in position “ ” , the
battery may run flat.
W h en th e v eh i cl e h a s c o m e t o a
standstill and you have stopped the
engine, set the ignition switch to
position “ ”.
)
)
)