APRILIA SCARABEO 500 - 2008, Service Station Manual

Page: 59 / 324

•
In case of uneven wear, replace the
pads when there is a thickness differ-
ence of 0.5 mm in the friction material.
CAUTION
ALWAYS REPLACE BOTH PADS AND MAKE
SURE THEY ARE CORRECTLY POSITIONED
INSIDE THE CALLIPER.
Dashboard
Turning the ignition key to "ON" activates all the
segments on the multifunction LCD (this checks
component correct operation) and displays the last
function set after switching off the engine.
NOTE
THE SERVICE ICON IS DISPLAYED ON THE
LCD AFTER RIDING THE FIRST 1000 km (621
mi) AND THEN AFTER EVERY 10000 km (6214
mi). THE SERVICE ICON FLASHES FOR
ABOUT 5 SECONDS AFTER THE IGNITION
CHECK, 300 KM (186 mi) TO THE NEXT SERV-
ICE. ONCE THE MILEAGE FOR A SERVICE
HAS BEEN REACHED, THE ICON WILL BE
STEADILY ON UNTIL THE SERVICE IS CAR-
RIED OUT.
Several functions can be selected and viewed on
the display using the (MODE) button « 1 » on the
controls on the left hand side of the handlebar. The
segments of the multifunction LCD display are the
following:
•
digital clock «3»,
•
odometer indicator «4»,
•
unit of measurement in km «5»,
•
icon showing unit of measurement in
miles «6»,
•
trip odometer indicator «7»,
•
scheduled maintenance service indi-
cator «8»,
•
fuel gauge «9».
The function sequence is summarised in the next diagram:
Pulse means each time the key is pressed for between 0.5 and 3 seconds.
SCARABEO 500
Maintenance
MAIN - 59