APRILIA SCARABEO 500 - 2008, Service Station Manual

Page: 152 / 324

- Refit the blow-by reed valve and use a new seal-
ing gasket.
- Refit the support with bulkhead by tightening the
screws to the prescribed torque.
Locking torques (N*m)
Supporting screws with bulkhead 0.3 ÷ 0.4
Refitting the flywheel cover
- Fit a new oil filter, lubricate the sealing gasket,
draw it close and finally tighten to the prescribed
torque.
Locking torques (N*m)
Engine oil filter 12 ÷ 16
- Fit the feed coupling to the cylinder and connect
the return coupling to the pump cover using 3 new
clamps.
NOTE
TIGHTEN THE CLAMPS USING APPROPRIATE
PLIERS, PAY ATTENTION NOT TO MARK COU-
PLINGS AND BE CAREFUL TO TIGHTEN THE
CLAMPS WELL ENOUGH.
- Refit the pre-filter and the engine oil drainage
plug; tighten the plug to the prescribed torque.
- Refill the engine with the prescribed type of oil.
Recommended products
AGIP CITY HI TEC 4T Engine oil
SAE 5W-40, API SL, ACEA A3, JASO MA Syn-
thetic oil
Locking torques (N*m)
Engine oil drainage plug 24 ÷ 30
Engine
SCARABEO 500
ENG - 152