57
use and maintenance
Scarabeo 250
R
TOPPING UP
u
Pour a small quantity of oil in the filling
hole (4) and wait about one minute, so
that the oil flows into the oil pan.
u
Check the oil level and top up if
necessary.
u
Top up by adding small quantities of oil,
until reaching the prescribed level.
u
At the end of the operation, screw and
tighten the plug/dipstick (3).
Do not use the vehicle with insufficient
lubrication or with contaminated or
unsuitable lubricants, since this would
cause premature wear of the moving
parts and may also cause irreparable
failures.
AIR FILTER
Carefully read page 51 (MAINTENANCE)
The air filter should be inspected and
c l e a n e d e v e r y 3 7 5 0 m i ( 6 0 0 0 k m ) ,
depending on the conditions of use.
If the vehicle is used on dusty or wet roads,
cleaning should be carried out more
frequently.
T o c l e a n t h e f i l t e r i n g e l e m e n t i t i s
necessary to remove it from the vehicle.
REMOVING
u
Raise the seat, see page 33
(UNLOCKING/LOCKING THE SEAT).
u
Release and remove the screws (1).
u
Withdraw the complete air filter (2) from
above.
u
Separate the screen (3) from the support
(4).
u
Remove the filtering element (5).
CLEANING
D o n o t us e p e t r o l o r i n f l a m m a b l e
solvents to wash the filtering element,
in order to avoid fires or explosions.
u
Wash the filtering element (5) with clean,
non-inflammable solvents or solvents
with high volatility point, then let it dry
thoroughly.
Scarabeo250USA.book Page 57 Friday, July 22, 2005 6:17 PM
