30
use and maintenance
Scarabeo 250
R
MAIN INDEPENDENT CONTROLS
CONTROLS ON LEFT HANDLEBAR
NOTE
The electric components only
operate when the ignition switch is in the
“
” position.
1) HORN BUTTON (
)
Press this button to operate the horn.
2) TURN INDICATOR SWITCH (
(
)
To indicate the turn to the left, move the
switch to the left; to indicate the turn to
the right, move the switch to the right.
Press the switch to cancel the signal.
3) DIMMER SWITCH (
-
) / HIGH
B E A M F L A S H E R P U S H B U T T O N
(PASSING )
if the dimmer switch is in position “
”,
the high beam comes on, while if it is in
position “
”, the low beam comes on.
The high beam flasher is operated by
pressing the dimmer switch to position
(PASSING ).
NOTE
Release the dimmer switch to
turn off the high beam.
C O N T R O L S O N R I G H T
HANDLEBAR
NOTE
The electric components only
operate when the ignition switch is in the
“
” position.
1) START PUSHBUTTON (
)
W h e n t h e s t a r t e r b u t t o n “
“ i s
pressed, the starter motor will crank the
engine. For the starting procedure, see
page 45 (STARTING)
2) ENGINE STOP SWITCH
(
-
)
Do not operate the engine stop switch
“
-
”
while riding.
This switch serves as a safety or
emergency switch.
With the switch in position “
”, it is
possible to start the engine; the engine
can be stopped by moving the switch to
position “
”.
W i t h t h e e n g i n e s t o p p e d a n d t h e
ignition switch in position “
” , the
battery may run down.
W h e n t h e v e h i c l e h a s c o m e t o a
standstill and you have stopped the
e ng in e , s e t t he ig ni t io n s w i tc h t o
position “
”.
)
)
1
2
Scarabeo250USA.book Page 30 Friday, July 22, 2005 6:17 PM
