APRILIA RALLY 50 Page 13 Manual Download | Manualshive

Page: 13 / 104

background image

13

use and maintenance

Rally 50

-

II. LIMITATIONS.

This Emission Control

System warranty shall not cover any of the
following:

A. Repair or replacement required as a re-

sult of
(1) accident,
(2) misuse,
(3) repairs improperly performed or re-

placements improperly installed,

(4) use of replacement parts or acces-

sories not conforming to

aprilia

specifications which adversely affect
performance and/or

(5) use in competitive racing or related

events.

B. Inspections, replacement of parts and

other services and adjustments re-
quired for required maintenance.

C. Any motorcycle on which the odometer

mileage has been changed so that actu-
al mileage cannot be readily deter-
mined.

III. LIMITED LIABILITY

A. The liability of

aprilia

under this Emis-

sion Control System Warranty is limited
solely to the remectying of defects in
material of workmanship by an autho-
rized

aprilia

motorcycle dealer at its

place of business during customary
business hours. This warranty does not
cover inconvenience or loss of use of
the motorcycle or transportation of the
motorcycle to or from the

aprilia

dealer.

aprilia

SHALL NOT BE LIABLE FOR

ANY  OTHER  EXPENSES,  LOSS  OR
DAMAGE, WHETHER  DIRECT, INCI-
DENTAL,  CONSEQUENTIAL  OR  EX-
EMPLARY ARISING IN CONNECTION
WITH THE SALE OR USE OF OR IN-
ABILITY TO USE THE

aprilia

MOTOR-

CYCLE  FOR  ANY  PURPOSE.  SOME
STATES  DO  NOT  ALLOW  THE  EX-
CLUSION OR LIMITATION OF ANY IN-
CIDENTAL  OR  CONSEQUENTIAL
DAMAGES,  SO THE ABOVE LIMITA-
TIONS MAY NOT APPLY TO YOU.

B. NO EXPRESS EMISSION CONTROL

SYSTEM WARRANTY IS GIVEN BY

aprilia

EXCEPT AS SPECIFICALLY

SET FORTH HEREIN. ANY EMISSION
CONTROL SYSTEM WARRANTY, IM-
PLIED  BY  LAW,  INCLUDING  ANY
WARRANTY OF MERCHANTABILITY
OR  FITNESS  FOR  A  PARTICULAR
PURPOSE,  IS  LIMITED  TO  THE  EX-
PRESS  EMISSION  CONTROL  SYS-
TEM WARRANTY TERMS STATED IN
THIS WARRANTY, THE FOREGOING
STATEMENTS  OF  WARRANTY  ARE
EXCLUSIVE  AND  IN  LIEU  OF  ALL
OTHER  REMEDIES.  SOME  STATES
DO  NOT  ALLOW  LIMITATIONS  ON
HOW LONG AN IMPLIED WARRANTY
LASTS SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU.

C. No dealer is authorized to modify this

aprilia

Limited Emission Control Sys-

tem Warranty.

«
...
11
12
13
14
15
...
»

Summary of Contents for RALLY 50









































































































Reviews:

No comments

Related manuals for RALLY 50

Brand: Maico Pages: 13

Brand: Ohlins Pages: 8

Premium Motorcycle Cover

Brand: Velmia Pages: 32

Brand: Memphis Shades Pages: 2

Brand: Paaschburg & Wunderlich Pages: 2

Brand: AMERICAN IRONHORSE Pages: 104

Brand: R&G Pages: 26

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 168

Brand: Yamaha Pages: 497

Brand: Yamaha Pages: 704

Brand: Yamaha Pages: 84

Brand: MSW Pages: 11

Brand: VESPA Pages: 46

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brand: Shad Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands