APRILIA RALLY 50, Manual

Page: 82 / 104

82 use and maintenance Rally 50
-
!$*534).' 4(% (%!$,)'(4
"%!- (/2):/.4!,,9
NOTE
The terms “right” and “left” are re-
ferred to the rider seated on the vehicle in
the normal riding position.
It is possible to adjust the horizontal posi-
tion both to the right and to the left.
The figures (B excluded) refer to the right-
ward position.
The adjustment is carried out using shims
and adjusting screws which are supplied
as a kit. They will be found in the crash
helmet / glove compartment.
To adjust the beam:
◆
Remove the front inner shield, see p. 73
( R E M O V I N G T H E F R O N T I N N E R
SHIELD).
◆
Unscrew and remove the screw (1).
◆
Unscrew and remove the screws (2).
a
CAUTION
Handle with care.
Take care not to damage the electric
wires.
◆
Loosen the headlight (3).
There are four groups of shims, for four dif-
ferent degrees of adjustment.
Each shim is marked with the type identifi-
cation code (for example: UPPER PIV.)
and with the group number (for example:
3°) (see table below).
Adjustment degree
Gruop 1
st
2
nd
3
rd
4
th
Shim
UPPER
PIV. 1 st
UPPER
PIV. 2 nd
UPPER
PIV. 3
rd
UPPER
PIV. 4
th
Screw 4,2 x 20 4,2 x 20 4,2 x 20 4,2 x 20
Shim
UPPER
OUT 1 st
UPPER
OUT 2 nd
UPPER
OUT 3 rd
UPPER
OUT 4 th
Screw 4,2 x 20 4,2 x 25 4,2 x 25 4,2 x 30
Shim
LOWER
1 st
LOWER
2 nd
LOWER
3 rd
LOWER
4 th
Screw 4,2 x 20 4,2 x 25 4,2 x 25 4,2 x 30