2. The Overview
2.1 The Flank Panel- Right Side
1
2 3
1. Power button.
2. Power & Network LED Indicators:
LED Indicative
Color
Status
Description
Solid Light
Booting/ Restart
Power LED
Red
Light off
While connected to LAN port
Solid Light
While connected to LAN port
Blinking
While LAN transferring data
Network LED
Green
Light off
Not connected to LAN
3. Reset button.
Use the end of a paper clip or some other similar object to press and hold the Reset button for at least 10
seconds to restore the factory default settings. If you reset the device, the device will return to factory
defaults, you will lose all your settings.
2.2 The Rear Panel
1
2
3
4
5
1. e-SATA:
The NVR supports an eSATA interface for connecting external storage devices for recording.
2. AUDIO IN/ AUDIO OUT:
The audio in connector is used to connect the audio output from a camera or other devices to the NVR.
The audio out connector provides the unit’s audio signal to a speaker or stereo.
3. VGA interface:
Connect to a VGA monitor.
3
