Appro LC-6740B User Manual Download Page 8

Page: 8 / 107

The component parts ( the internal view ).

1. Screw

holes:

Guide to assist correct casing alignment with the cable channel.

ETHERNET 10/100 Connector:

This is a standard RJ-45 connector for 10/100 Mbps

Ethernet networks. PoE (Power over Ethernet) function:

Provides power to the device via the

same cable as used for the network connection.

3. WPS

button

(for the Wi-Fi model only)

4. Reset

button:

Recover to factory default.

5. Speaker:

Connector is used to connect the audio output from other devices to the camera.

6. Microphone:

The built-in microphone records audio of the surrounding area.

7. LED

indicator:

The Power and network indicator.

8. LED

indicator:

The WPS indicator (for the Wi-Fi model only).

Micro SD CARD slot:

Insert a Micro SD card for Local storage for storing recorded image and

video. This is used for updating system software and archiving / accessing critical images.

10. DC-in:

Connects to 12V DC power.

Summary of Contents for LC-6740B












































































































Search results

Summary of Contents for LC-6740B

Reviews:

Related manuals for LC-6740B

Brands by name

Popular brands

Appro LC-6740B, User Manual

Search results

Summary of Contents for LC-6740B

Reviews:

Related manuals for LC-6740B

Brands by name

Popular brands