z
Change the Application Setting —Motion And PIR.
Please follow the steps below to enable changes in the motion detection function of the alarm
through the network as necessary.
Set the motion detection:
1.
Click on the
Motion and PIR
button on the left side of the Alarm to enter the “Motion
Detection” page.
2.
Click and drag the mouse across a targeted zone to draw a rectangle on the image.
Note
You can set more than one targeted zone depending on your requirement.
3.
Enables / disables the motion detection function.
4.
Click on the
Submit
button to submit the new setting of the recording.
Description of function keys:
Enable Video Motion
Select this option to enable motion detection for your camera.
Sensitivity
The sensitivity bar allows you to specify how much movement is required to trigger the
motion detection.
Percentage
Adjusting the percentage allows you to set a requirement on how much of the motion
window must be filled by movement. For example: If you set this function at 50%, then
the selected window must be half filled by a moving object before it triggers motion
detection.
Enable PIR
When this option is selected, use PIR (passive infrared) to detect motion.
68
Summary of Contents for LC-6740B
Page 21: ...19 Figure 3 2 1 Figure 3 2 2 Figure 3 2 3 Figure 3 2 4 Figure 3 2 5 Figure 3 2 6 ...
Page 32: ...30 ...
Page 35: ...33 ...
Page 107: ...RMN_V1 0 105 ...
