3 INSTALLATION
Please follow the instructions and the diagram below to set up the system.
Hardware Installation
1.
Connect Ethernet cable to the rear panel of the camera.
2.
Plug in the power connection to the camera.
3.
Confirm the correct network connection status.
WPS - Push Button Setup
To create a WPS connection:
1.
Press and hold the WPS button for about 5~6
seconds. The WPS status LED will flash.
2.
Press the WPS button on your router within 60
seconds. The camera will automatically create a
wireless connection to your router. While
connecting, the status LED will flash. After the
connection process is complete, the status LED will turn solid.
Note
Please make sure that your router supports WPS, then you can use the WPS button on the
camera to easily create a secure wireless connection to your network.
On some routers, you may need to log in to the web interface and click on an on-screen
button to activate the WPS feature.
8
Summary of Contents for LC-6740B
Page 21: ...19 Figure 3 2 1 Figure 3 2 2 Figure 3 2 3 Figure 3 2 4 Figure 3 2 5 Figure 3 2 6 ...
Page 32: ...30 ...
Page 35: ...33 ...
Page 107: ...RMN_V1 0 105 ...
