GETTING STARTED
6
RTP-3280 Thermal Receipt Printer
Chapter 2: Getting Started
This section describes how to set up the printer for the first time and provides
instructions on basic operations, such as turning on the printer, loading the paper roll
and others.
2.1 Choosing a Location
The printer can be placed on a level surface or mounted on the wall.
Mounting the Printer
NOTE:
To mount the printer, a wall mount kit is required.
Use only approved wall mount kits. Contact your dealer to purchase.
1.
Drill the wall to make three holes at
Ф
6.5mm distance and depth over
35mm. Insert the three anchors inside the each hole.
2.
Attach the mounting bracket to the wall surface using the three screws.
3.
Align the mounting screws to the designated hook holes of the printer.
