Applied Membranes MYRON L COMPANY Ultrameter III 9PTK Operation Manual Download Page 53

Page: 53 / 76

software application.

Verify that the port selected matches the COM port number

noted (first time only). This is the outgoing COM port on

Windows XP.

In the U2CI application, click on the data download button.

A data transfer bar will appear while the data is being

downloaded.

Once downloaded, the data may be manipulated, printed or stored within

the Myron L U2CI application, or the data may be exported to another

more powerful spreadsheet, such as Excel*.

Please Note: Although the Myron L Company has performed extensive

testing, we cannot guarantee compatibility of all applications and formats.

We suggest testing your application and format for compatibility before

relying on it.

Additional features such as assigning a name to the unit, setting time

and date and erasing data are available. See U2CI software installation

CD or visit our website for the latest instructions:

http://myronl.com/main/U2CI_Application_DL.htm

Upon completion, click on the “disconnect” icon.

Turn off Ultrameter

III

PC download mode by selecting any

measurement function. Failure to do so will reduce battery life.

* Windows 2000, 2007, XP & Vista are registered trademarks of Microsoft Corporation.

** Macintosh OS9.2 & OSX are registered trademarks of Apple Computer Inc.

Xvii. care and maintenance

Ultrameter

•

III

s should be rinsed with clean water after use.

Solvents should be avoided.

•

Do not drop, throw or otherwise strike the instrument. Shock

•

damage may cause instrument failure.

Temperature Extremes

Solutions in excess of 71°C/160°F should not be placed in the cell

cup area; this may cause damage. The pH sensor may fracture if the

Ultrameter

III

temperature is allowed to go below 0°C/32°F. Care should

be exercised not to exceed rated operating temperature.

Leaving the Ultrameter

III

in a vehicle or storage shed on a hot day

can easily subject the instrument to over 66°C/150°F. This will void the

warranty.

Distributed by Applied Membranes, Inc. www.appliedmembranes.com

Summary of Contents for MYRON L COMPANY Ultrameter III 9PTK













































































Search results

Summary of Contents for MYRON L COMPANY Ultrameter III 9PTK

Reviews:

Related manuals for MYRON L COMPANY Ultrameter III 9PTK

Brands by name

Popular brands

Applied Membranes MYRON L COMPANY Ultrameter III 9PTK, Operation Manual

Search results

Summary of Contents for MYRON L COMPANY Ultrameter III 9PTK

Reviews:

Related manuals for MYRON L COMPANY Ultrameter III 9PTK

Brands by name

Popular brands