37
DATE are also recorded. To download the memory to a computer, ref.
bluDock™ WIRELESS DATA TRANSFER INSTRUCTIONS
, pg. 47.
A. Memory Storage
1.
While displaying a measurement, press
to record the
displayed value.
2.
“
memOry
” will appear and the temperature display will
be momentarily replaced by a number (1-100) showing the
position of the record. Figure 9 shows a reading of 1806 µS
stored in memory record #4.
B. Memory Recall
1.
Press any measurement key.
2.
Press
; “
memOry
” will appear, and the display will show
the last record stored.
3.
Press
or
to scroll to the record location desired
(the temperature display alternates between temperature
recorded and location number).
4.
Press
to display time and date stamp.
5.
Press any measurement key to leave memory recall or allow to
automatically turn off.
C. Clearing a Record/Memory Clear
After recalling a certain record location, press and HOLD
to
clear that memory. This space will be the place for the next memory
record, unless you scroll to another empty position before ending the
recall sequence. The next memory stored will go into the next highest
available memory location.
Example: You have locations 1-7 filled and wish to clear the
conductivity reading stored in record location #
3
and replace it with a
pH reading.
Distributed by Applied Membranes, Inc. www.appliedmembranes.com
Summary of Contents for MYRON L COMPANY Ultrameter III 9PTK
Page 2: ...Distributed by Applied Membranes Inc www appliedmembranes com ...
Page 4: ...ii Distributed by Applied Membranes Inc www appliedmembranes com ...
Page 73: ...Distributed by Applied Membranes Inc www appliedmembranes com ...
Page 75: ...Distributed by Applied Membranes Inc www appliedmembranes com ...