CSP-SNv Capacitor Charging Unit Operation
Manual
CSP-CSPSNV-8000/3
_______________________________________________________________________________________________
__________________________________________________________________________________________________________
Page
52
of
56
Appendix C
–
CSP-Dv / CSP-Nv / CSP-SNv Log - MCU F/W 1.13
Log download after last CSP operation
Settings Format:
$SETTINGS,<MODEL>,<SERIAL NO>,<MCU F/W>,<CPLD F/W>,<POWER>,<LEVEL>,
<KEY SOURCE>,<KEY IN POLARITY>,<KEY IN DELAY>,<KEY IN DELAY TIME>,
<KEY OUT POLARITY>,<INTERNAL RATE>,<KEY IN TIMEOUT>,<AVIP>,<FLIP-FLOP>,
<QC LOG OUTPUT>,<LOCAL/REMOTE>,<LCD CONTRAST>,<EOC LIMIT>,<CURRENT LIMIT>,
<32-BIT HEX PEAK CURRENT SCALER>,<KEY IN OFFSET>,<CHARGE PROFILE>:
Example Settings:
$SETTINGS,CSP-Nv 1200,2345678,1.14,1.07,0050J,LO,EXT,POS,ON,0085us,POS,
1000ms,30s,ON,OFF,ON,LOC,050%,090%,7700A,000625D5,0024us,1:
Log Format:
$LOG,<TIME>,<DATE>,<32-BIT HEX KEY NUMBER>,<KEY RATE>,
<PRE-FIRE VOLTAGE>,<POST FIRE VOLTAGE>,<PEAK CURRENT>,
<TAMBIENT>,<TINLET>,<TOUTLET>,
<32-BIT HEX EVENT FLAGS>,<32-BIT HEX FAULT FLAGS>:
Example Logs:
$LOG,14:44:59,24-MAY-2018,00001786,0200ms,2504v,0022v,6446A,25c,26c, 24c,
00020080,00000000:
$LOG,14:44:59,24-MAY-2018,00001786,0000ms,0000v,0000v,0000A,25c,26c, 24c,
00000000,00000001:
Termination Log Format indicates CSP operation termination source:
$TERMINATION,<SOURCE(S)>:
Example Termination Logs:
$TERMINATION,HV_OFF_LATCH,HV_OFF SWITCH:
This log indicates CSP operation was terminated normally by HV OFF button press.
$TERMINATION,HV_OFF_LATCH,FAULT_LATCH,TA FAULT:
This log indicates CSP operation was terminated abnormally due to high ambient
temperature of operating environment.
$TERMINATION,POWER SUPPLY INTERRUPTED FAULT:
This log indicates CSP operation was interrupted abnormally by mains input or internal
power supply failure.
Summary of Contents for CSP-SNv 1250
Page 1: ...CSP SNv 1250 2400 Capacitor Charging Unit Operation Manual ...
Page 56: ......