APPLIED ACOUSTICS 1082, Operation Manual

Page: 29 / 48

1082 Smart Switch Operation Manual
CHA-1082-8000/11
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page 29 of 48
Trickle=OFF
Select OFF
Standing by
Trickle Charge
Trickle=ON
Select ON
Standing by
Trickle Charge
3.7 Trickle Charge
Trickle charge a connected compatible AAE beacon. Trickle charge activation is controlled by an
electronic switch within the Smart Switch, sourcing power for beacon trickle charging from the
30VDC power supply unit: -
NOTE:
- Refer
beacon manual for compatibility and trickle charging details.
Fig. 22
Press to return to top tier main menu option “Trickle Charge”. Press to change the selection
ON or OFF. Press to select trickle charge ON or OFF.
The Smart Switch will not activate trickle charging if it does not detect the 30VDC power supply
unit. If the 30VDC power supply unit is not detected, the Smart Switch will indicate “No DC PSU!”.
Insert the 30VDC power supply to activate trickle charge ON. The Smart Switch will indicate
“Selected!”. The electronic switch within the Smart Switch will close and the L.C.D. charge active
icon will be displayed.
NOTE:
- Serial communication with a connected beacon is stopped on selection of trickle
charge menu option. To re-establish serial communication with beacon, select main menu
option “Fast ID beacon” or a “Beacon Config” sub menu option.
While trickle charging is active, the Smart Switch can continue to be used for connected beacon
configuration and responder testing. The L.C.D. charge active icon will continue to be displayed.
Trickle charging will remain active if the Smart Switch enters very low power standby after 2
minutes of user inactivity.
Fig. 23
The Smart Switch continually monitors the 30VDC power supply unit while trickle charge is active.
If the Smart Switch does not detect the 30VDC power supply unit, the electronic switch within the
Smart Switch will open and the L.C.D. charge active icon will be removed. Trickle charge will have
to be re-activated if required.
Change ON or OFF.
Select ON or OFF.