APPLIED ACOUSTICS 1082, Operation Manual

Page: 17 / 48

1082 Smart Switch Operation Manual
CHA-1082-8000/11
__________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Page 17 of 48
to select AA
Select 00 Standing by
AAE Channel
On selection of a sub menu option, if the Smart Switch is not currently communicating with a
connected beacon, i.e. is “Standing by”, the Smart Switch will first attempt serial communication
with a connected beacon, indicated by a “Searching...” message to the user. If a connected beacon
is ‘found’, the beacon model and configuration will be identified and the selected sub menu options
display updated accordingly. Once communication has been established with a connected beacon,
the Smart Switch will maintain communication with the beacon. If no beacon is ‘found’ after a fixed
number of attempts, the Smart Switch will stop communication and revert to “Standing by”.
3.5.1.1 AAE Channel
A user selection with flashing cursor highlighting one digit is displayed: -
Fig. 9
Press to return to the previous tier sub menu option “AAE Channel”. Press to change the
highlighted hexadecimal digit. Press to shift the flashing cursor to highlight the next digit of
the user selection. Press to select the “channel”. The Smart Switch will display a “Waiting...”
message followed by either a “Selected!” message on confirmation from a connected beacon that it
has configured successfully, or a “Failed!” message instructing the user to retry selecting.
After a “Selected!” message, the Smart Switch will automatically return to the previous tier sub
menu option “AAE Channel” and re-establish communication with a connected beacon. The user
can then verify configuration from the identified beacon model and configuration message. Refer
Section 3.4.1.
NOTE: -
Refer beacon manual for AAE “channel” listings.
NOTE: -
For unavailable AAE “channels”, on selection the Smart Switch will display “Unavailable!”
message.
Change digit.
Shift flashing cursor.
Select “channel”.