Applestone APU06E Owner'S Manual Download

Page: 127 / 134

121

OWNER’S WARRANTY RESPONSIBILITIES

As the vehicle owner, you are responsible for the performance of the required

maintenance. You should maintain a record of all maintenance performed on your

vehicle and retain all receipts covering maintenance on your vehicle. You may not be

denied a warranty claim solely because of your failure to ensure the performance of

all scheduled maintenance or lack of maintenance records or receipts. You are

responsible for presenting your vehicle to an authorized dealer as soon as a problem

exists. The warranty repairs should be completed in a reasonable amount of time,

not to exceed 30 days.

As the vehicle owner, you should be aware that you may be denied your warranty

coverage if your vehicle or a part has failed due to abuse, neglect, improper

maintenance, or unapproved modifications.

Summary of Contents for APU06E







































































































































Search results

Summary of Contents for APU06E

Reviews:

Related manuals for APU06E

Brands by name

Popular brands

Applestone APU06E, Owner'S Manual

Search results

Summary of Contents for APU06E

Reviews:

Related manuals for APU06E

Brands by name

Popular brands