Applestone APU06E Owner'S Manual Download

Page: 132 / 134

126

causes beyond the control of the Distributor.

• Failures not caused by a defect in material or workmanship.

Use of the vehicle in any type of competitive racing or related events immediately

and completely voids this and all other warranties.

LIMITED LIABILITY

The liability of the Distributor under this Emission Control System Warranty is

limited solely to the remedying of defects in material workmanship by an authorized

dealer at its place of business during customary business hours. This warranty does

not cover in convenience or loss of use of the vehicle or transportation of the vehicle

to/from the authorized dealer. The Distributor is not liable to any person for incidental,

consequential or special damages of any description, whether arising out of express

or implied warranty or any other contract, negligence or other tort or otherwise.

No express emission control system warranty is given by the Distributor except as

Summary of Contents for APU06E







































































































































Search results

Summary of Contents for APU06E

Reviews:

Related manuals for APU06E

Brands by name

Popular brands

Applestone APU06E, Owner'S Manual

Search results

Summary of Contents for APU06E

Reviews:

Related manuals for APU06E

Brands by name

Popular brands