manualshive.com logo in svg

Applestone APU06E, Owner'S Manual

Share
Download
Applestone APU06E Owner'S Manual Download Page 115

 

- 109 -

CLEANING AND STORAGE 

CLENANING 

Frequent, though cleaning of your 
vehicle will not only enhance its 
appearance but will improve its 
general performance and extend the 
useful life of many components. 
1. Before cleaning the vehicle: 

a. Block off the end of the exhaust 

pipe to prevent water entry. A 
plastic bag and strong rubber 
band may be used. 

b. Make sure the spark plug and all 

filler caps are properly installed. 

2. If the engine case is excessively 
greasy, apply degreaser with a paint 

brush. Do not apply degreaser to the 
wheel axles. 

3. Rinse the dirt and degreaser off with a 

garden hose. Use only enough 
pressure to do the job. 

 

CAUTION : 

Excessive water pressure may cause 
water seepage and deterioration of 
wheel bearings, brakes, transmission 
seals and electrical devices. Many 
expensive repair bills have resulted 
from improper high pressure 
detergent applications such as those 
available in coin-operated car washers.

Summary of Contents for APU06E







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands