Applestone APU06E Owner'S Manual Download Page 100

Page: 100 / 134

(3) Turn on the ignition switch, inspect
the fuel pressure, the pressure is
3Bar.
(4)

Remove the spark plug, check if

has the flash fire.

Starting

(1) Keep oil passage in stable and

reliable.

(2) Keep the ignition system is in

working condition.

(3) Keep the gear lever in neutral.
(4) Keep the idle speed control valve

and intake pressure sensor is
connected correctly.

(5) Turn off the accelerator

completely, press the start switch

Attention!

If fail to start, turn off the start

switch few seconds, then start
again

（

not more than 5 seconds

）

(6)

Turn off the throttle, shift the gear

into “H”,”L” and “R” after the
vehicle completely stopped.

Warning!

When shift, must stop the car and
turn off the throttle, otherwise will
damage the machine and cause
the accident.

Warning!

●

Keep the engine warn up few

minutes before start the driving.

●

When the engine start, should

release the electric switch
immediately, each start time lasting

Summary of Contents for APU06E







































































































































Search results

Summary of Contents for APU06E

Reviews:

Brands by name

Popular brands

Applestone APU06E, Owner'S Manual

Search results

Summary of Contents for APU06E

Reviews:

Brands by name

Popular brands