Appendix A: Onboard Configuration
● Device Reset
28
3DLevelScanner Operating Instructions © 2013 APM all rights reserved
The screen displays the Firmware Version
of the scanner.
Press to proceed.
The screen displays the Device Type: S, M
or MV.
Press to exit and switch back to the Main
Menu.
Device Reset
This function allows selection of different reset options: Reset, Reset to Factory settings
and Reset to Lab settings. Use with caution!
At the Main Menu, navigate down using the
key to select
Device Reset
, and Press to
proceed.
The Reset menu allows selection of the
required Reset option.
The
Reset
option brings the scanner to
power-up mode and clears measurements.
The
Reset to Factory
option will reset all
parameters to their default values as well as
performing the
Reset
option.
Select the desired Reset option using the
key and press to proceed.
On selecting Reset or Reset to Factory, a
confirmation request screen appears.
Select
Yes?
to proceed with the reset and
restart process, or
No?
to cancel reset.
Press to proceed and go back to the main
menu.
Device Type
3DLevelScanner <MV>
5
HW Version
020
3
Main Menu
Display Settings
Device Info
→Device Reset
Reset the device?
→Yes?
No?
2
Reset
→Reset
Reset to Factory
1