18
3DLevelScanner Operating Instructions © 2013 APM all rights reserved
4
First-Time Activation
4.1
Local User Interface
Configuration and adjustment of the 3DLevelScanner must be done using the
3DLevelManager software, with the optional addition of GSM/GPRS communications
using 3DLinkPro. For detailed configuration procedure, refer to
APM 3DLevelManager
Software Manual
and the
3DLinkPro Manual
.
The 3DLevelScanner User Interface
The user interface includes a 4-lines LCD display and
the four keys located on the front side of the device,
marked ESC, +, - and E.
Key functions are as follows:
Navigates back within a function menu.
Continuous 3 second press exits to the
default screen.
Navigates upwards in the navigation list.
Navigates right within a function.
Navigates downwards in the navigation list.
Navigates left within a function.
Navigates to the right when within a function group.
Stores a value once configured.
The following, simultaneous key-press combinations perform special functions as follows:
Increases / decreases the LCD display intensity.
Press and hold the
button, then use the or
buttons to increase or
decrease the intensity of the display.