Aplex ACS-2685 User Manual Download Page 56

Page: 56 / 82

ACS-2685 User Manual

Quiet Boot:

[Disabled]

[Enabled]

Disabled: Displays normal POST messages.

Enabled: Displays OEM logo instead of POST messages.

AddOn ROM Display Mode:

Set display mode for Option ROM.

[

Force BIOS

]

[Keep Current]

Bootup Num

－

Lock:

Select Power-on state for Numlock.

[

On]

[Off]

Wait For

‘F1’ If Error:

Wait for F1 key to be pressed if error occurs.

[

Enabled

]

[Disabled]

Hit

‘DEL’Messgae Display :

Displays

“press” DEL to run Setup in POST.

[

Enabled

]

[Disabled]

Interrupt 19 Capture:

Enabled: Allows option ROMs to trap interrupt 19.

[Disabled]

[Enabled]

Boot Device Priority:

Specifies the Boot Device Priority sequence.

Hard Disk Devices :

Specifies the Boot Device Priority sequence from available Hard Drives.

Summary of Contents for ACS-2685



















































































Search results

Summary of Contents for ACS-2685

Reviews:

Related manuals for ACS-2685

Brands by name

Popular brands

Aplex ACS-2685, User Manual

Search results

Summary of Contents for ACS-2685

Reviews:

Related manuals for ACS-2685

Brands by name

Popular brands