Aplex ACS-2685 User Manual Download Page 54

Page: 54 / 82

ACS-2685 User Manual

[32]

[96]

[128]

[160]

[192]

[224]

[248]

Allocate IRQ to PCI VGA:

[Yes]

[

No]

Palette Snooping:

[Disabled]

[Enabled]

PCI IDE BusMaster:

[Disabled]

[Enabled]

OffBoard PCI/ISA IDE Card:

Some PCI IDE cards may require this to be set to the PCI slot number that is

holding the card. Auto:Works for most PCI IDE Cards.

[Auto]

[PCI Slot1]

[PCI Slot2]

[PCI Slot3]

[PCI Slot4]

[PCI Slot5]

[PCI Slot6]

IRQ3/4/5/7/9/10/11/14/15:

[Available]

[

Reserved]

Available: Specified IRQ is available to be used by PCI/PnP devices.

Reserved: Specified IRQ is reserved for use by legacy ISA devices.

DMA Channel 0/1/3/5/6/7:

[Available]

[

Reserved]

Available: Specified DMA is available to be used by PCI/PnP devices.

Summary of Contents for ACS-2685



















































































Search results

Summary of Contents for ACS-2685

Reviews:

Related manuals for ACS-2685

Brands by name

Popular brands

Aplex ACS-2685, User Manual

Search results

Summary of Contents for ACS-2685

Reviews:

Related manuals for ACS-2685

Brands by name

Popular brands