9
1. Connect your AQUASPIN meter to your PC via the USB cable.
2. Next, initiate the AQUASPIN program by signing into your account at: https://
www.api
fi
shcare.com/login
3. Refer to the FILLING section (page 5) for this step.
4. Place the
fi
lled disk into the AQUASPIN meter and cover the disk with the
Universal Disk Cover. Close the meter lid.
5. Once signed into your retailer account, ask the customer if they have an
AQUASPIN Advise account.
a. If the customer already has an account, enter their email address
under the CONSUMER ACCOUNT LOOKUP section and select the tank
name they are testing.
b. If the customer does not have an account, enter their email address
and tank type under the REGISTER NEW CONSUMER ACCOUNT
section.
6. Next, select the disk type (the disk type can be found on the foil packet). Then,
hit RUN TEST button on the computer screen. The meter will automatically
begin the test.
7. After a few minutes, the results will populate on the computer screen
accompanied by API product recommendations.
8. An option to email the results and recommendations to the customer is then
made available and the results are saved to the customer’s AQUASPIN Advise
account.
9. Dispose of the used disk to prepare for future tests.
NOTE: Remove salt residue daily. Salt will damage the meter and cause inaccurate results.
See the CLEANING section in the manual.
TESTING: NOT CONNECTED TO A COMPUTER*
12:14 AM
23-May-18
Aquarium
Disk Series
Fresh
Q104
Tap to
Start Test
Summary of Contents for AP-3580
Page 1: ...Simple Precise Digital Water Testing...
Page 2: ...2...
