background image

21

API AQUASPIN Manual

AP-3580-MN

API AQUASPIN Quick Reference Guide

AP-3580-QG

API AQUASPIN Counter Mat

AP-3580-MAT

API AQUASPIN Banner

AP-3580-BAN

API AQUASPIN Decal

AP-3580-DECAL

MAINTENANCE 

CLEANING

The optical system of the API AQUASPIN must be kept clean and dry for optimal 

performance. Dry the disk with a lint-free wipe before placing it in the chamber to 

avoid introducing moisture. For best results, store the instrument in an area that is 

dry and free from aggressive chemical vapors. Clean the exterior housing with a 

damp, lint-free cloth. Do not allow water to enter the light chamber or any other 

parts of the meter. To clean the light chamber and optic lenses, point a can of 

compressed air into the light chamber and the lid and blow the pressurized air 

into the light chamber and lid. Focus the pressurized air around the LEDs which 

are the small round lenses positioned at 2:00, 4:00, 6:00, 8:00, 10:00 and 12:00 in the 

lid. The photodiodes are located on the bottom of the chamber around the hub. 

This area must be kept clean and dry. Use a cotton swab dampened with streak-

free window cleaner to gently swab the LED and photodiode lenses. Do not use 

alcohol; it will leave a thin residue over the optics when dry.
Remove smudges due to routine use from the touchscreen with the Cloth Wipe 

(Code 3580-WIPE-GEN). Use a cloth dampened with alcohol for more thorough 

cleaning when necessary. Do not use streak-free window cleaner, or similar 

cleaners, on the touchscreen.

REPAIRS 

Should it be necessary to return the meter for repair or servicing, pack the meter 

carefully in a suitable container with adequate packing material. A return 

authorization number must be obtained from LaMotte Company by calling 800- 

344-3100, ext. 3 (US only) or 410-778-3100, ext. 3, faxing 410-778-6394, or emailing 

[email protected]. Often a problem can be resolved over the phone 

or by email. If a return of the meter is necessary, attach a letter with the return 

authorization number, meter serial number, a brief description of problem and 

contact information including phone and FAX numbers to the shipping carton. This 

information will enable the service department to make the required repairs more 

ef

fi

 ciently.

METER DISPOSAL

Waste Electrical and Electronic Equipment (WEEE)
Natural resources were used in the production of this equipment. This equipment 

may contain materials that are hazardous to health and the environment. To avoid 

harm to the environment and natural resources, the use of appropriate take-back 

systems is recommended. The crossed out wheeled bin symbol on the meter 

encourages the use of these systems when disposing of this equipment.

Take-back systems will allow the materials to be reused or recycled in a 

way that will not harm the environment. For more information on 

approved collection, reuse, and recycling systems contact local or 

regional waste administration or recycling services. Do not incinerate the 

equipment.

Summary of Contents for AP-3580

























Reviews: