APG MPX-E, User Manual

Page: 24 / 40

20 Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
Holding Registers (0x03)
Register Function Value Range
40400 Device Address 1 to 247 *
40401 Units 1, 2, 3
40402 Application Type 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
40403 Volume Units 1, 2, 3, 4, 5, 6, 7
40404 Decimal Place 0, 1, 2, 3 *
40405 † Max Distance 0 to 10,364 mm
40406 Full Distance 0 to 10,364 mm
40407 Empty Distance 0 to 10,364 mm
40408 † Sensitivity 0 to 100
40409 † Pulses 0 to 20
40410 † Blanking 0 to 10,364 mm
40411 Fail Safe 0 = Disable, 1 = 3.8 mA, 2 = 22 mA
40412 Averaging 1 to 31
40413 Filter Window 0 to 10,364 mm
40414 Out of Range Samples 1 to 255
40415 Sample Rate 10 to 1,000 msec.
40416 † Multiplier 1 to 1,999 (1000 = 1.000)
40417 † Offset -10,364 to 10,364 mm
40418 † Pre filter 0 to 10,364 mm
40419 † Noise limit 0 to 255
40420 NA NA
40421 RTD Offset (
0
C) -100 to 100
40422 † Float Window 0 to 1,000 mm 0=1 float
40423 1st Float Offset -10,364 to 10,364
40424 2nd Float Offset -10,364 to 10,364
40425 † Gain Offset 0 to 255
40426 4 mA Set Point 0 - 10,364 mm
40427 20 mA Set Point 0 - 10,364 mm
40428 † 4 mA Calibration 0 - 1,000
40429 † 20 mA Calibration 0 - 1,000
40430 t1d NA *
40431 t1w NA *
40432 t1t NA *
40433 t2d NA *
40434 t2w NA *
40435 t2t NA *
40436-40437 Parameter 1 Data 0 to 1,000,000 mm
40438-40439 Parameter 2 Data 0 to 1,000,000 mm
40440-40441 Parameter 3 Data 0 to 1,000,000 mm
40442-40443 Parameter 4 Data 0 to 1,000,000 mm
40444-40445 Parameter 5 Data 0 to 1,000,000 mm
* These registers are not used by the MPX-E/R2 or MPX-E/R3, even though they are labeled in the APG
Modbus software.
† Setting is factory calibrated. Do not adjust.