- 3 -
1. Introduction
Thank you for choosing Apera Instruments PC60-Z Smart Multi-Parameter Water Tester. This product
is designed for accurate measurement of pH, conductivity, TDS, salinity, resistivity, and temperature
for general water solution applications such as pools and spas, hydroponics, water treatment,
aquarium, environment monitoring, etc.
1.1 Search “zentest smart” in Apple App Store or Google Play App Store to download the latest App
for your tester. Turn on the Bluetooth of your phone, go to ZenTest App, tap on the upper right
corner, then select your tester to connect.
1.2 For video tutorials on how to get the most out of ZenTest
®
, please go to support.aperainst.com.
1.3 This product is designed with a two-way control on both the tester and ZenTest App. Please refer
to the functions available on each platform in the following table. This manual shows you how to
operate the tester without connecting to a smartphone.
Functions
60-Z Tester
ZenTest Mobile App
Display
LED display
1.Basic Mode: digital calibration info
Swipe to switch
among various
modes
2.Dial Mode: digital dial display
3.Graph Mode: digital graph display
4.Table Mode: digital real time
measurement and history display
Calibration
Press buttons to
operate
Operate on smartphone following graphic guides
Self-Diagnosis
Er1 – Er6 icons
Detailed problem analysis and solutions
Parameter
Setup
Press buttons to
set up (except
for P7 and P11)
All parameters can be set up in Settings.
Alarm
The screen
turns red when
alarm triggered;
cannot be setup
Alarm display and alarm values can be preset for each
parameter
Data
Management
N/A
Manual or Auto. Datalogger; notes can be added to saved data
Data Output
N/A
Share data on Smartphone
Table 1: Functions on 60-Z Tester and ZenTest
®
Mobile App
