AQUAKOND AKY
CONDENSING BOILER
6
code HC0048.10GB ed.B-1811
AKY
1.
GENERAL CAUTIONS
This manual is an integral part of the product and must always
accompany it.
Should the equipment be sold or passed on to someone else,
always make sure that this manual is supplied with the equipment
for future reference by the new owner and/or installer.
The manufacturer shall not be held civilly or criminally responsible
for injuries to people or animals or damages to things caused
by incorrect installation, calibration and maintenance or by
failure to follow the instructions contained in this manual or by
operations carried out by unqualified staff.
This product must be used only for the applications for which
it was designed or approved. Any other use must be regarded
as hazardous.
During the installation, operation and maintenance of the
equipment described in this manual, the user must always strictly
follow the instructions given in this use and instruction manual.
The equipment must be installed in compliance with current
regulations and according to the manufacturer's instructions
by
qualified staff
, technically specialised in the heating field.
First start-up, conversion between different types of gas and
maintenance operations must be carried out only by staff of
Authorised Service Centres (for Italy, authorised by Apen
Group Spa)
.
APEN GROUP has a large network of authorised Service
Centres. For more information, refer to the telephone directories
or contact the manufacturer directly.
The warranty conditions are specified on the warranty certificate
supplied with this equipment.
The manufacturer declares that the equipment has been
workmanlike manufactured in compliance with UNI, UNI-CIG, IEC,
EN technical standards and with all relevant legislation, as well as
with Gas Directive 2009/142/EEC.
For Swiss market, reference standards are:
•
SSIGA G1 Directive: Directive for natural gas equipment
in buildings;
•
Cantonal requirements (AICAA- Firefighting directives,
Thermal technical systems (2015)).
2.
SAFETY-RELATED WARNINGS
The following symbol is used in this manual to attract machine
operators’ attention.
Accident prevention rules for the operator
and the personnel operating nearby.
Please find below the safety regulations for the installation room
and the air vents.
2.1. Fuel
Before starting up the boiler, make sure that:
•
the gas mains supply data are compatible with the data
stated on the nameplate;
•
the combustion air intake ducts and the fume exhaust pipes
are only those specified by Apen Group;
•
the gas seal of the feeding system has been tested and
approved in compliance with the applicable standards;
•
the boiler is supplied with the same type of fuel it has been
designed for;
• the system is correctly sized for such flow rate and is fitted
with all safety and monitoring devices required by applicable
standards;
•
the internal cleaning of gas pipes has been correctly carried out;
• the fuel flow rate is suitable for the power required by the boiler;
• the fuel supply pressure is between the range specified on
the nameplate.
2.2. Gas Leaks
If you smell gas:
•
do not operate electrical switches, telephones or any other
object/device that could produce sparks;
•
immediately open doors and windows to create an air flow
to vent the gas out of the room;
•
close the gas valves;
•
call for
qualified staff.
