Setup
Document No. D109-010
Page 44 of 108
Revision 1.15
Polling individual Groups for each DNP3 Outstation (e.g. Group 32 – Analog Input
Events).
Figure 3.39 – DNP3 Master Event Unloading
The unloading of buffered events into a Logix controller is explained in section 5.
3.7.
MODULE DOWNLOAD
Once the DNP3 configuration has been completed, it must be downloaded to the module.
Before downloading the Connection Path of the module should be set. This path will
automatically default to the IP address of the module, as set in the module configuration. It
can however be modified, if the DNP3 Router is not on a local network.
